Oct 9, 2026 · 8 min read · by TrueMid Manufacturing
You have a part to make. The CAD file is done. Then the quoting form asks: which process? SLA, FDM, or SLS — and the wrong choice can double your cost or produce a part that fails in your hands. This guide breaks down the three most common 3D printing processes the way an engineer actually decides: by what the part needs to do.
| SLA (Resin) | FDM (Filament) | SLS (Nylon Powder) | |
|---|---|---|---|
| Best for | Visual prototypes, fine detail, smooth finish | cheap functional parts, jigs, large simple parts | functional parts, complex geometry, snap fits |
| Surface | Excellent (needs light sanding at most) | Visible layer lines | Matte, sandy texture |
| Strength | Brittle-ish, UV-sensitive | Anisotropic (weak between layers) | Isotropic-ish, tough, durable |
| Tolerance | ±0.1mm | ±0.2–0.3mm | ±0.2mm |
| Detail level | 0.05mm features | ~0.4mm nozzle limits | 0.6–0.8mm features |
| Relative cost | Medium | Lowest | Medium-high |
| Typical lead time | 5–9 days | 5–9 days | 7–12 days |
SLA (stereolithography) cures liquid resin with a laser, producing the smoothest surface of any 3D printing process and details down to 0.05mm. It's the right call for:
The trade-offs: SLA parts are more brittle than SLS nylon, degrade under prolonged UV exposure, and generally shouldn't be used for load-bearing functional parts. Our medical device enclosure case study is a typical SLA project — presentation-grade finish, zero structural duty.
FDM (fused deposition modeling) extrudes thermoplastic filament layer by layer. It's the cheapest process and works in familiar engineering plastics: PLA, ABS, PETG, Nylon, TPU, and even carbon-filled variants.
The catch: FDM parts are anisotropic — significantly weaker between layers than along them. A bracket printed flat will be strong; the same bracket printed vertically may snap along a layer line under load. Design load paths accordingly.
SLS (selective laser sintering) fuses nylon powder with a laser. Because un-sintered powder supports the part, no support structures are needed at all — which changes what's possible:
Trade-offs: the as-printed surface is matte and slightly grainy (bead-blasting and dyeing fix this), and fine features below ~0.6mm don't survive. Tolerances run around ±0.2mm.
Metal 3D printing (DMLS/SLM) exists for geometries that machining can't reach — conformal cooling channels, internal passages, topology-optimized brackets. But for most metal parts, CNC machining is faster, cheaper, and more precise. We do both, and we'll tell you honestly which one your part needs. Our DMLS heat exchanger case shows when metal additive is genuinely worth it.
Send us the file. Process selection is free with every quote — we review your geometry and recommend the cheapest process that meets your requirements, not the most expensive one that fits. Typical quote turnaround: 12 hours.
Free DFM review, process recommendation, and detailed quote within 12 hours.
Request a Quote →