💬 WhatsApp

Heat Exchanger Core — DMLS 316L with Conformal Channels

  • 316L Stainless
  • Conformal Channels
  • Post-machined Threads
  • 3 units
  • 14 days
Heat Exchanger Core — DMLS 316L with Conformal Channels

An energy systems engineering firm needed compact heat exchanger cores with conformal channels that followed the contour of the hot face — geometry that cannot be drilled or brazed. Traditional manufacturing would have meant a welded assembly of 9 parts with leak risk at every joint.

The Challenge

  • Conformal internal channels, 3mm bore, smooth enough for fluid flow
  • NPT threads had to seal against fittings at 10 bar
  • Pressure-test-worthy parts — not display models

Our Solution

We printed the cores as single DMLS parts in 316L stainless, orienting the channels to minimize powder traps and stair-stepping inside the bore. Ports were left with 1mm stock, then finish-machined and NPT-tapped for guaranteed thread sealing. Each core was pressure tested before shipment.

Process & Specs

ItemDetail
ProcessDMLS metal 3D printing + CNC post-machining
Material316L stainless steel
Internal featuresConformal channels, 3mm bore
Post-processingFinish-machined ports, NPT threads, pressure test
Quantity3 units
Lead time14 days door-to-door (DHL)

Outcome

All three cores held 10 bar without weeping. Thermal testing showed a 23% improvement over the client's previous brazed design — the geometry advantage was real, and it only exists because of additive manufacturing.

Need a Part Like This?

Send your STEP/STL files — we'll recommend the best process and quote within 12 hours.

Request a Quote →