💬 WhatsApp

CNC Prototype Machining: What to Send for a 12-Hour Quote

A 12-hour CNC quote is realistic when the package is complete. The delay usually is not the shop's queue — it is a missing material, no quantity, or a 3D file that cannot be measured. This is the file set we can review the same day, plus the notes that keep the quote accurate.

Machined aluminum CNC prototype parts

The 30-Second Checklist

Send these with the first message. If one item is still undecided, say so — "undecided" is more useful than leaving it blank.

IncludeWhy it matters
3D model in STEP (or IGES / native CAD)We can measure features, check tool access, and price machining time
Quantity, even if it is "1 now, maybe 20 later"Setup cost is spread across the batch; one piece and twenty pieces are different quotes
Material, or a close equivalent6061-T6, 304, 316L, brass, and POM do not machine or finish the same way
What the part has to doA fit-check prototype and a load-bearing bracket should not be quoted the same
PDF drawing, if you have oneThreads, finishes, and critical tolerances are easier to read on a 2D sheet

Nice to have, but not required for a first pass: surface finish (as-machined, bead blast, anodize), a need-by date, and any feature you already know is tight or awkward.

Upload the files on our CNC machining page, or email them to bruce@truemidmanufacturing.com. We return a free DFM review and quote within 12 hours. Typical production and worldwide delivery is 5–14 days.

Send a 3D File the Shop Can Measure

For CNC prototype machining, STEP (.step / .stp) is the file we want first. It keeps real dimensions, holes, and faces. IGES and native SolidWorks, Fusion 360, or Inventor files are fine too.

Do not send only an STL for a machined part. STL is a surface mesh made for 3D printing. It drops the precise diameters and flatness a mill needs, so we spend the first hour reconstructing geometry — or we have to ask you for a better file, which burns the 12-hour window.

A screenshot or a phone photo of the part is useful context, not a substitute for the model.

If you have a PDF drawing, send it with the STEP file. The model shows the shape; the drawing should show the intent:

  • Which dimensions are critical, and which can stay at a general tolerance (ISO 2768-m is a solid default)
  • Thread size, class, and depth (M4×0.7 through, 1/4-20 UNC to 8mm, and so on)
  • Finish and masking, especially if only some faces are anodized
  • Datums, if fits or assembly matter

If you do not have a drawing yet, still send the STEP file. We can quote from the model and flag the dimensions that need a callout.

Write These Five Things in the Message

A short note next to the files is enough. These five lines prevent most back-and-forth:

  1. Quantity. "One prototype now, 25 if the fit is good" is a complete answer. We will price the first article and the follow-on batch separately if that helps you decide.
  2. Material. Name the alloy if you can (6061-T6 aluminum, 304 stainless, C360 brass, POM/Delrin, 1018 steel). If you only know the requirement — "light, outdoor, not decorative" — say that, and we will recommend a grade.
  3. Finish. As-machined is common for prototypes. If you need bead blast, anodize (specify color and type if you care), zinc, or a painted cosmetic face, write it down. Finishing is often a large part of lead time and cost.
  4. Tolerance default. Tight everywhere is the most expensive habit in prototype machining. Call out ±0.05mm only on fits, bearing bores, and mating faces. Leave the rest at a general tolerance, or tell us "ISO 2768-m unless marked." For how this changes price, see our guide on cutting CNC machining costs.
  5. When you need it. "Standard 5–14 days is fine" or "need it on my bench by the 5th" changes how we plan the job. Do not leave the date out if there is a test, a show, or a design review behind the part.

If the part is aluminum and the geometry is straightforward, that package is usually enough to quote without another question.

What Usually Slows a Quote Down

These are the gaps we see most often on otherwise good RFQs:

  • STL only, no STEP. We will ask for a CAD export before we lock a machining price.
  • No quantity. A one-off absorbs programming and setup alone; a small batch does not. We cannot give a useful unit price without a number.
  • "Quote all materials." Three alloys means three process plans. Pick one primary and one alternate, or tell us the functional constraint and let us choose.
  • Every dimension at ±0.05mm. That forces slower feeds, more inspection, and a higher price for features that do not need it.
  • Thread notes missing. "Tapped hole" is not a specification. Size, pitch, and depth belong on the drawing or in the email.
  • Export or ITAR questions left unsaid. If the part has a use or destination that needs extra screening, mention it early so we can tell you honestly whether we can take it.

None of these means the job is a bad fit. They just turn a same-day quote into a round of clarification.

What You Get Back Within 12 Hours

On a complete package, you get two things, at no charge and with no obligation:

  • A DFM review. Tool access, internal corner radii, thin walls, deep pockets, and tolerances that will inflate cost or risk. We would rather flag a problem before you buy than after a part is already in the vise.
  • A detailed quote. Process, material, finish, quantity breaks where they help, and a lead time. Production and worldwide delivery typically land in 5–14 days, depending on geometry, finish, and quantity.

If something in the file is unclear, we will ask a focused question instead of padding the price to cover the unknown.

CNC machining centers on the TrueMid production floor

Ready to Send the Files?

Upload a STEP or PDF on our quote form, or email bruce@truemidmanufacturing.com. WhatsApp is also fine: +86 152-9186-1855. Include the checklist above, and we will return a free DFM review and quote within 12 hours.

Want a Quote on Your Part?

Free DFM review, process recommendation, and detailed quote within 12 hours.

Request a Quote →